Skip to content
ACE FORGE HVAC — Go-green solution provider

Education

Classroom ventilation with heating and cooling for schools, campuses and portables, where occupancy density and summer use both drive the equipment selection.

What decides the design

  • Ventilation is the dominant load: classrooms are densely occupied, so the outdoor-air requirement per room often exceeds what the heating and cooling load alone would suggest.
  • The building alternates between long unoccupied periods and heavy use, and retrofit work is confined to a short summer window — equipment has to hold setback, recover the space in the morning and be changeable within the break.
  • Summer programmes and year-round community use mean cooling is now specified in buildings designed for heating and ventilation only, which changes the electrical service.
  • Gymnasiums, cafeterias, shops and portables each carry a different load profile and occupancy pattern, and one central system rarely serves all of them with a single control strategy.

Recommended system combination

These families are selected together, not individually — the match between them is what makes the system work.

Rooftop Package Units

commercial equipment

Classroom, gym and cafeteria conditioning in one cabinet, 3–30 ton, with integrated outdoor-air treatment and energy recovery, electric heat or heat pump heating options.

Rooftop package units from 3 to 30 ton, with deep customisation up to 50–100 ton including DOAS and make-up air.

Specifications →

Light Commercial Indoor Units

air conditioning

Concealed ceiling units for classrooms, offices and retrofit zones that have no rooftop curb or plant space.

Light commercial indoor units in three types — round-flow cassette, floor-ceiling and concealed ducted — for offices, retail and other light commercial spaces.

Specifications →

ERV / HRV — AspireVent Series

ventilation

Room or cluster-level recovery ventilation at 100 or 150 CFM for portables, small rooms and phased retrofit areas.

Heat and energy recovery ventilators, 100 / 150 CFM, side or top port, with ECM motors and a washable recovery core.

Specifications →

Motorized Dampers — MUD Series

ventilation

Make-up air and exhaust balancing for washrooms, shops and science rooms, in 4" to 10" round sizes.

Round motorized dampers for balancing fresh air against exhaust, with a silent 24 VAC hysteresis motor and spring return to closed.

Specifications →

Diffusers & Grilles

ventilation

Air distribution for classrooms and halls — jet, slot and swirl diffusers for high ceilings, round or square ceiling diffusers for suspended ceilings, and return grilles.

Ceiling and wall air distribution — jet, slot, swirl and round or square ceiling diffusers, grilles and air disc valves.

Specifications →

Selection points

  1. 01

    Establish the outdoor-air requirement per classroom and per portable first: it sets the unit airflow and often the unit size, particularly where one packaged unit delivers ventilation air and space conditioning together.

  2. 02

    Confirm whether the economizer and energy-recovery packages are required, and order them with the unit: both are factory options on the rooftop platform and change the cabinet arrangement.

  3. 03

    For retrofit zones without a rooftop curb, concealed ducted or low-profile floor-ceiling indoor units paired with a side-discharge outdoor unit avoid structural work and roof penetrations.

  4. 04

    Specify setback and start-of-day recovery with the control package. The AFT533D supports a 7-day schedule, circulate mode and preheat or precool to reach the scheduled temperature on time.

  5. 05

    Match the diffuser to the ceiling and the throw: jet, slot and swirl diffusers suit high or exposed ceilings, round and square ceiling diffusers suit suspended ceilings, and grilles handle walls and returns.

  6. 06

    Confirm damper sizes against the exhaust quantities for washrooms, shops and science rooms — round dampers are available in 4", 5", 6", 8" and 10", each with flow-control adjustment.

Technology segments involved

Working on a project of this type?

Send the drawings or the duty requirement — we will come back with a matched configuration and the model-level confirmation.

Request a quote