Skip to content
ACE FORGE HVAC — Go-green solution provider

Light Commercial Indoor Units

Light commercial indoor units in three types — round-flow cassette, floor-ceiling and concealed ducted — for offices, retail and other light commercial spaces.

Refrigerant:R-32

Specifications

Detailed dimensional and performance data for this family is being finalised. Ask us for the current submittal sheet.

Overview

Light commercial indoor units are the indoor half of a split or multi-split system for spaces larger than a single room but smaller than a full commercial project — offices, retail units, clinics and light fit-outs. The range covers the three mounting types that most of those spaces need.

Round-flow cassette units sit in a suspended ceiling and distribute air in 360°, which suits open-plan areas where the unit should not blow directly at one desk. Floor-ceiling units mount on the wall or floor and throw air along the room, which suits spaces without a usable void. Concealed ducted units sit above the ceiling and deliver through a short duct run and diffusers, which suits rooms where only the grilles should be visible.

The range is listed with R-32 refrigerant in the current catalogue. Dimensional and performance data is being finalised; ask us for the current submittal sheet before specifying.

Where it is used

  • Offices and coworking spaces where a cassette or ducted unit keeps the ceiling clean
  • Retail units and showrooms where airflow should follow the shopfront or aisle layout
  • Clinics, salons and small hospitality spaces that need quiet, zoned comfort
  • Light fit-outs where the ceiling void decides which of the three types is possible
  • Multi-room projects that pair several indoor units with one outdoor unit

Selection & installation notes

  1. 01

    Start from the ceiling: a suspended grid usually points to a cassette, a solid ceiling with a service void points to a ducted unit, and a wall/floor position with no void points to a floor-ceiling unit.

  2. 02

    Match the airflow pattern to the room shape — 360° for open plan, straight throw for long narrow rooms, ducted for rooms where the unit must stay out of sight.

  3. 03

    Confirm the refrigerant and system pairing against the outdoor unit before ordering; the catalogue lists R-32 for this range.

  4. 04

    Ask for the model-level submittal sheet (dimensions, airflow, connection sizes) — this family page intentionally carries no number until the factory data is confirmed.

Common questions

Which indoor unit types are in this range?

Three: round-flow cassettes, floor-ceiling units and concealed ducted units. Each is a different answer to the same question — where the unit can physically go and how the air should reach the room.

Which refrigerant do these units use?

The current catalogue lists R-32 for this range. Confirm against the exact model and outdoor unit pairing on the submittal sheet before ordering.

Why are there no dimensions or airflow figures on this page?

The catalogue for this family lists the three unit types but not the model-level data. We only publish parameters we can source, so the numbers follow when the factory specification sheet is confirmed — ask us and we will send the current one.

Can these be supplied as OEM / private label?

OEM and private-label supply is handled through the OEM / ODM programme, including branding and packaging. Send the model, target market and volume so the right route is quoted.