Skip to content
ACE FORGE HVAC — Go-green solution provider

Installation Accessories

Mounting bases and line-set piping for outdoor units — BigFoot equipment bases rated 150–800 kg with a built-in spirit level, and copper or aluminium + copper piping kits with insulation and fittings.

Specifications

BigFoot equipment bases

Installation Accessories — BigFoot equipment bases specifications
ParameterValue
ModelsAFT-BF250 · BF400 · BF450 · BF500 · BF600 · BF-1000
Length (A)250 / 400 / 450 / 500 / 600 / 1000 mm
Profile (B × C)163 × 98 mm
Load rating150 / 400 / 400 / 500 / 600 / 800 kg
ConstructionUV-resistant base, anti-corrosion aluminium slot, built-in spirit level
Supplied with4 sets of installation locking screws and washers

HVAC piping kits

Installation Accessories — HVAC piping kits specifications
ParameterValue
Kit typesCopper line set · aluminium + copper line set
Sizes (standard 4 m)1/4 × 3/8 · 1/4 × 1/2 · 1/4 × 5/8 · 3/8 × 5/8
Suitable for9,000 – 24,000 Btu mini-split systems
Insulation and accessoriesRubber or white insulation; optional drainage tube and adhesive tape
Special pipingCoil (pancake) tube · capillary tube · flexible insulated tube
CustomisationLength, accessories and packing to order (carton or plastic sealed)

Values as published in the 2026 product catalogue. Ask us for the model-level submittal sheet before specifying.

Features

  • ✓BigFoot bases raise an outdoor unit clear of the roof or ground, for heat pumps and A/C condensing units
  • ✓Each base supplies four sets of installation locking screws and washers, and includes a spirit level for levelling on site
  • ✓UV-resistant body with an anti-corrosion aluminium slot; six lengths from 250 mm to 1000 mm, rated 150 kg to 800 kg
  • ✓HVAC piping kits in copper or aluminium + copper, insulated in rubber or white, with optional drainage tube and adhesive tape
  • ✓Line-set sizes from 1/4 × 3/8 to 3/8 × 5/8 for 9,000–24,000 Btu mini-split systems — 4 m standard, other lengths available
  • ✓Special piping: coil (pancake) tube, capillary tube and flexible insulated tube, with length, accessories and packing to order

Overview

Installation accessories are the parts that decide how an outdoor unit sits and how the refrigerant lines reach it. This range covers the two items that come up on nearly every job: BigFoot mounting bases for heat pumps and A/C condensing units, and HVAC piping kits for mini-split line runs.

BigFoot bases lift a unit clear of the roof surface or the ground and keep it level. There are six lengths — 250, 400, 450, 500, 600 and 1000 mm — with the same 163 × 98 mm profile, so the choice is a matter of unit footprint and weight: load ratings run from 150 kg on the shortest base to 800 kg on the longest. The body is UV-resistant with an anti-corrosion aluminium slot, and each base ships with four sets of installation locking screws and washers plus a spirit level for setting it on site.

The piping kits are supplied as copper or aluminium + copper line sets, insulated in rubber or white, and sized 1/4 × 3/8, 1/4 × 1/2, 1/4 × 5/8 and 3/8 × 5/8 for systems from 9,000 to 24,000 Btu. A standard set is 4 m; other lengths, accessories and packing (carton or plastic sealed) can be specified. For runs that do not suit a straight coil, the range also includes coil (pancake) tube, capillary tube and flexible insulated tube.

Where it is used

  • Rooftop or ground mounting of heat pump and A/C outdoor units where the unit has to sit clear of the surface
  • Mini-split installations that need an insulated line set matched to the system capacity
  • Retrofit and replacement work where the existing base or line set is being renewed
  • Projects that take the base, line set and fittings from one supplier so the sizes match
  • Special runs that need coil (pancake) tube, capillary tube or flexible insulated tube

Selection & installation notes

  1. 01

    Choose the base by footprint and weight: the profile is the same across the range, so length and load rating are the deciding numbers (150 kg to 800 kg across the six lengths).

  2. 02

    Leave the spirit level in place while tightening — the base carries one specifically so the unit can be levelled before the locking screws are finally set.

  3. 03

    Match the line-set diameter to the system capacity: 1/4 × 3/8 for 9,000 Btu, 1/4 × 1/2 for 12,000 Btu, 1/4 × 5/8 for 18,000 Btu and 3/8 × 5/8 for 24,000 Btu.

  4. 04

    Decide the insulation and the accessories with the order — rubber or white insulation, and optional drainage tube and adhesive tape.

  5. 05

    Lengths, accessories and packing are made to order; confirm the exact configuration per model on the submittal sheet.

Common questions

What comes with a BigFoot base?

Four sets of installation locking screws and washers, and a built-in spirit level for levelling the base before the unit is fixed down.

Which base sizes and load ratings are available?

Six lengths: 250, 400, 450, 500, 600 and 1000 mm, all with a 163 × 98 mm profile. Load ratings are 150 kg (250 mm), 400 kg (400 and 450 mm), 500 kg (500 mm), 600 kg (600 mm) and 800 kg (1000 mm).

Which line-set size do I need for a given system?

The published pairing is 1/4 × 3/8 for 9,000 Btu, 1/4 × 1/2 for 12,000 Btu, 1/4 × 5/8 for 18,000 Btu and 3/8 × 5/8 for 24,000 Btu. Standard length is 4 m; other lengths are available.

Can the piping kits be customised?

Yes — length, accessories and packing can be specified, with the option of a carton or a plastic-sealed pack. Insulation is available in rubber or white, and drainage tube and adhesive tape are optional additions.

What special piping is available?

Coil (pancake) tube, capillary tube and flexible insulated tube, again with length, accessories and packing to order.