Round-Flow Cassette
Four-way round-flow cassette indoor units with 24V control.
Refrigerant:R-32
Specifications
Detailed dimensional and performance data for this family is being finalised. Ask us for the current submittal sheet.
| Parameter | Value |
|---|---|
| Air outlet | 4-position |
| Control | 24V |
| Refrigerant | R-32 |
Values as published in the 2026 product catalogue. Ask us for the model-level submittal sheet before specifying.
Features
- ✓Four-position air outlet for even distribution in open ceilings
Overview
A round-flow cassette is a ceiling indoor unit with a four-position air outlet: the chassis sits above the ceiling and the panel below it throws air in four directions, so one unit can cover a room from the centre instead of relying on a duct run. The family is published with 24V control and R-32.
It belongs to the same split platform as the rest of our indoor range and is included among the units paired with the side-discharge outdoor units. It suits rooms with a ceiling void where duct routing is impractical and even distribution matters more than a low profile. Selection work is mostly about the ceiling: panel opening, void depth, service access and condensate routing.
Where it is used
- Open-plan offices and meeting rooms with a suspended ceiling
- Retail and hospitality floors where duct runs are not practical
- Reception and public areas where a ceiling grille is preferred to a wall unit
- Zoned layouts giving each zone its own ceiling unit
Selection & installation notes
- 01
Place the unit centrally: a four-position outlet distributes in four directions, so an off-centre location leaves one side of the room short of air.
- 02
Confirm the ceiling void depth and the panel and opening dimensions per model; neither is published at family level.
- 03
Settle the condensate route before ordering — whether the model includes lift, and the fall available in the drain run, are per-model details.
- 04
The family is published with R-32 and 24V control; confirm the outdoor unit match and keep the refrigerant the same across the pair.
- 05
Allow access from below for filters and panel removal, and keep the space above the panel clear.
Common questions
Which capacities are available?
Capacity data is not published at family level. Send the room load and the outdoor unit you intend to pair with, and we will confirm the available capacities.
Can it be connected to a third-party outdoor unit?
The cassette is developed for our own split platform and is included among the units paired with our side-discharge outdoor units. We publish no cross-brand match data.
Is a condensate pump required?
Our family data does not state whether lift is included or optional. Confirm the drain arrangement for the model you are quoting, before the ceiling is closed.
Does it need a specific ceiling type?
It needs a void deep enough for the chassis and a matching panel opening. Confirm void depth and panel dimensions on the submittal sheet; suspended and plaster ceilings both work if the void and access do.
Related products
A-Coil & Cased Evaporator Coils
Cased evaporator coils matched to our side-discharge outdoor units, in three coil sizes. Custom and OEM coil configurations available.
Side-Discharge Outdoor Units
SEER2 18 inverter side-discharge condensing units, 1.5–5 ton, designed to pair with A-Coils, AHUs and field replacement of existing condensers.
Top-Discharge Outdoor Units
Top-discharge condensing units, 2–5 ton, with GMCC compressors and DC fan motors.