Engineer’s Notes
Short, practical notes on the problems that come up in real projects — coil matching, refrigerant transitions, retrofit choices and the details that decide whether an installation goes smoothly.
Engineer’s note · Nov 18, 2026
AFT533D vs. Nest and ecobee: a smart thermostat comparison
A feature-level comparison of the Ace Forge AFT533D smart thermostat with Nest and ecobee, plus what HVAC distributors should check before switching a line.
Read →Engineer’s note · Nov 11, 2026
Canada's National Heat Pump Rebate: An Opportunity for HVAC Contractors
The new federal heat pump rebate: what contractors and distributors need to know about amounts, timing, documentation and complete-system eligibility.
Read →Engineer’s note · Nov 9, 2026
Why the right fresh air damper matters for ventilation and furnace systems
How a motorized fresh air damper affects ventilation, furnace operation and cold-weather performance — and the checks that decide whether it works.
Read →Engineer’s note · Nov 4, 2026
Why Distributors Should Audit a Supplier's Spare-Parts System
A practical audit checklist for HVAC distributors: the parts documentation, lead times and warranty mechanics that decide whether a program is profitable.
Read →Engineer’s note · Oct 28, 2026
Continuous Variable Airflow HRV: A Smarter Way to Ventilate Modern Homes
How a continuous variable airflow HRV differs from a two-speed unit, what to check on the data sheet, and how to select one for a Canadian home.
Read →Engineer’s note · Oct 23, 2026
Magnetic Filters: Why Magnetite Matters for Heat Pumps
Where black iron oxide comes from in a hydronic loop, why it collects in heat pump heat exchangers, and how a magnetic filter is sized and serviced.
Read →Engineer’s note · Oct 21, 2026
EC Motor vs AC Motor in Condenser Fans
Electronically commutated versus permanent split capacitor condenser fan motors: where the efficiency actually comes from, and what changes in service.
Read →Engineer’s note · Oct 16, 2026
PEXFit vs Copper: Installation Time and Leak Risk
Multilayer PEX-AL-PEX line sets versus copper: where the joints are, what each system demands of the installer, and the code question to settle first.
Read →Engineer’s note · Oct 14, 2026
Zoning Systems for Forced-Air Homes: Design Basics
Zone dampers, a control panel, a bypass damper and per-zone thermostats: how forced-air zoning is designed, and the mistakes that ruin static pressure.
Read →Engineer’s note · Oct 9, 2026
BTU, Ton, SEER, SEER2, HSPF, AFUE: A Plain-English Glossary
What BTU, ton, SEER, SEER2, HSPF, AFUE, SRE and COP actually mean, how they are tested, and which numbers a Canadian distributor should compare.
Read →Engineer’s note · Oct 6, 2026
Whole-House Dehumidifier Sizing: Reading the PPD Table
Pints-per-day ratings only mean something with their test conditions attached. How to read a dehumidifier capacity table and size a ducted unit correctly.
Read →Engineer’s note · Oct 2, 2026
ERV vs HRV: Choosing for Canadian Winters
ERV or HRV for a Canadian house? An engineer's guide to sensible recovery, frost control, core type and the questions to ask before you specify.
Read →Engineer’s note · Sep 30, 2026
Cased vs Uncased Coils: When Each One Wins
Cased and uncased evaporator coils are not interchangeable. A factory engineer explains the cabinet, the duct connection, drainage and the retrofit trade-offs.
Read →Engineer’s note · Sep 26, 2026
Dual-Fuel vs Full Replacement Heat Pump Retrofits in Canada
A factory engineer's comparison of dual-fuel, add-on and full replacement heat pump retrofits in Canada: what changes, what stays, and how to choose.
Read →Engineer’s note · Sep 23, 2026
How to Read an AHRI Match: A Buyer's Checklist
An AHRI match certificate describes a tested combination, not a single box. Here is the field-by-field checklist we use before quoting an A-Coil or outdoor unit.
Read →
Looking for a specific answer?
Ask the engineering team — model, application and target market are enough to start.
