Selection & Installation Guides
The working documents behind a specification: how to match components, what the tables mean, and where projects usually go wrong.
Each guide follows the same structure, so you can read the section you need rather than the whole document: what decision is being made, what data you need in front of you, how the options compare, what belongs in the submittal, and the failure modes that show up in the field. Comparison tables are built as methods — the line items to compare — rather than as our numbers, because cost and performance depend on your project and your market.
Guides that depend on factory data we have not received yet stay unpublished rather than appearing as a stub. If the guide you need is not here, ask for the selection table directly — that is usually faster than waiting for the document.
Technical guide · Nov 13, 2026
PEXFit Multilayer Pipe: A Line-Set Installation Guide
A practical guide to PEX-AL-PEX line sets: five-layer construction, the fitting range, the eight-step install sequence, and the code question to settle first.
Read →Technical guide · Nov 12, 2026
Heat Pump Systems in Canada: A Design and Retrofit Guide
How to choose between add-on, dual-fuel and full replacement in Canadian homes — cold-climate capacity, backup heat, controls and the refrigerant decision.
Read →Technical guide · Nov 11, 2026
HVAC Core Components and Replacement: A Distributor's Guide
The components that decide aftermarket profitability — fan motors, water-side filtration, heat exchangers and spares — and how to specify and replace them properly.
Read →Technical guide · Nov 10, 2026
Residential Ventilation and IAQ: A Canadian System Guide
A system-level guide to ventilation, humidity, distribution and filtration in Canadian homes — how the pieces interact, and what to demand before you specify.
Read →Technical guide · Oct 28, 2026
Air Outlets: Jet, Slot, Swirl and Grille — How to Select
How to choose between jet, slot, swirl and ceiling diffusers, grilles and air disc valves — and the four numbers to demand before you specify one.
Read →Technical guide · Sep 24, 2026
How to Import HVAC Equipment into Canada: Documentation Checklist
A document-by-document checklist for importing HVAC equipment into Canada: NRCan reporting, Canadian certification marks, provincial permits and bilingual rules.
Read →Technical guide · Sep 24, 2026
PIR Pre-Insulated Duct vs Galvanized: A Cost and Installation Comparison
A buyer's framework for comparing PIR pre-insulated duct panels with traditional galvanized-iron ducting: line items, submittal data and failure modes.
Read →Technical guide · Sep 24, 2026
Rooftop Package Units for Commercial Retrofits (3–30 Ton)
How to plan a 3–30 ton rooftop package unit retrofit: survey data, comparison tables, submittal content, crane-day sequencing and common failure modes.
Read →
